Banner

Boiler blower induced draft fan

Home>company's product > Boiler blower induced draft fan

Boiler blower induced draft fan

‍‍The following editor will give you an introduction to the installation and use of the boiler induced draft fan by the high-pressure blower manufacturer. I hope it can help you. ‍‍‍‍Before installation of the boiler blower induced draft fan: a comprehensive inspection should be carried out on all parts of the fan, such as whether the parts are complete, whether the rotation direction of the impeller and the casing is the same, whether the connection of each part is fastened, whether the main parts such as the impeller, main shaft, and bearings are damaged , Whether the transmission unit is flexible, etc. When installing the boiler induced draft fan: pay attention to check the casing, there should be no tools and sundries that have fallen or left behind in the casing. In order to prevent rust and reduce the difficulty of disassembly, some joints should be painted...

Boiler blower induced draft fan

The following editor will introduce you to the installation and use of the boiler blower induced by the high-pressure blower manufacturer. I hope to help you.

Before installation of the boiler induced draft fan: a comprehensive inspection should be carried out on all parts of the fan, such as whether the mechanical parts are complete, whether the rotation direction of the impeller and the casing is the same, whether the connection of each part is fastened, whether the main mechanical parts such as the impeller, main shaft, and bearings are damaged, Whether the transmission group is flexible, etc.

When installing the boiler induced draft fan: pay attention to check the casing, there should be no tools and sundries that have fallen or left behind in the casing. In order to prevent rust and reduce the difficulty of disassembly, some lubricating grease or mechanical oil should be applied to some joint surfaces. The joint surface of the fan and the foundation, and the joint surface of the air inlet and outlet pipes should be carefully adjusted to make it natural and not to be forcibly connected. Do not add the weight of the pipe to the components of the fan, and pay attention to ensuring the horizontal position of the fan

Boiler blower induced draft fan installation requirements

1. Install according to the position and size marked on the drawing. In order to ensure high efficiency, it is especially necessary to ensure the axial and radial clearance between the air inlet and the impeller.

2. The grooves between the spindle V-belt pulley and the motor V-belt pulley must not be misaligned. After putting on the tape, a safety cover should be installed for safety.

3. Install the regulating door, be careful not to install it backwards, and ensure that the direction of air intake is consistent with the direction of rotation of the impeller

4. After installation, try dialing the transmission unit to check whether there is abnormal phenomenon such as over-tightening or scratching or even collision at the fixed part

Our company mainly sells in Hebei, Northeast, Henan, Tianjin, Shaanxi, Inner Mongolia, Shanxi and Ningxia. If you are interested in our products, you are welcome to inquire!


Finished product library

No Information