If you want to do a good job in fire-fighting and smoke exhaust engineering, if you don't understand the linkage principle of stainless steel fans, can you not do a good job of coordination between the various structures? So what is its linkage principle? Let us (stainless steel fan manufacturer) introduce to you.
Its linkage principle mainly relies on two linkage methods:
1. The action signal of the smoke exhaust valve is connected to the control box of the fire smoke exhaust air to directly adjust the characteristics: high temperature resistance effect and efficiency.
2. The action signal of the smoke exhaust valve is sent to the fire control room through the bus, and the fire host controls the module through the bus, and then the smoke exhaust fan is recommended. This is also called software control.
3. Ventilation, air conditioning, smoke prevention and electric fire damper control system: The general practice is to link the smoke exhaust valve separately, or plan a control module and a supervision module for installation. After the detector alarms, the control module receives the command from the alarm controller to open the smoke exhaust valve, and the signal for the operation of the smoke exhaust valve is completed by the supervisory module.
We have introduced the linkage principle of stainless steel fan to you. We hope to help you. We produce and sell related equipment. If you have any needs, you can directly contact us (stainless steel fan manufacturer).