Banner

news

Home>news>Content

Why choose high temperature and high pressure centrifugal fan

2019-05-28

Hebei Shunteng Fan Manufacturing Co., Ltd. specializes in productionHigh temperature and high pressure centrifugal fan, It adopts split structure, fully enclosed and covered. Firm installation. Convenient disassembly, assembly and maintenance. In addition, the outside of the high temperature and high pressure centrifugal fan is equipped with inlet and outlet holes, which is convenient for inspection and cleaning of the impeller and avoids contamination of the impeller. So why choose a high temperature and high pressure centrifugal fan? The following editor will take you to take a look.

Regarding the principle of the monitoring system of the high temperature and high pressure centrifugal fan fan, by detecting the indoor temperature and comparing it with the set temperature, when cold or hot air is needed in the room, the controller opens the electric valve and fan to provide cooling or heating to the room. In some models, when the indoor temperature is lower than 5°C, the ventilator is automatically activated to prevent the coil from freezing and cracking. Check the interlocking device, anti-flying device, shaft displacement device, sealing system connecting device, anti-flying device, shaft displacement device, sealing system interlocking device, waterway system adjusting device, Valves and instruments should be sensitive and reliable, and meet the requirements of the equipment technical documents. Check that the name, model, main performance and quantity of lubricating oil should meet the requirements of the equipment technical documents. Check that the lubrication system and the dense filling system are thoroughly flushed according to the equipment technical documents. Check that the steering of the motor, steam turbine, or gas turbine should match the steering of the blower. When checking the rotating blower rotor.

For high temperature and high pressure centrifugal fans, the speed of the blower will affect the air volume. Under normal circumstances, the speed is proportional to the air volume of the blower. The higher the speed of the blower, the larger the volume of the blower. The lower the speed is the opposite. The operation of the blower is performed by the rotor, and the air volume of the blower is determined by the frequency of the rotation of the rotor of the blower.

According to the different physical and chemical properties of the air conveyed by the ventilator. The one with higher efficiency and smaller machine number: larger adjustment range should be selected first. When the fan selection performance chart shows that there are more than two types of fans to choose from. Of course, they should be compared and decided by weighing the pros and cons. In order to use the original motor shaft, bearing and support, etc. If the selected fan impeller diameter is much larger than the original fan impeller diameter. The starting time of the motor, the strength of the original components of the fan, and the critical speed of the shaft must be accounted for.

The above is the introduction of the editor today. If you want to know more about the price of high temperature and high pressure centrifugal fan or which product is good for high temperature and high pressure centrifugal fan, you can call our hotline, we have the most professional staff to answer you!


What constitutes a high temperature centrifugal fan

Maintenance of anticorrosive centrifugal fan and the cause of failure